Discontinuation of PENN P66 and S66 Series Fan Speed Controllers

Вид документа	Зняття з виробництва
Виробник	JCI
Код документа	discontinuation-of-penn-p66-and-s66-series-fan-speed-controllers
Група обладнання	P266 Single-Phase Fan Speed Control
Сторінок	3
Мова документа	англійська
Розмір файлу	0.4 МБ

Текст документа

PRODUCT DISCONTINUATION
Building Automation Systems and Controls

August 12, 2026

Discontinuation of PENN P66 and S66 Series Fan
Speed Controllers
LIT-12001604

• Building Solutions: • IDC • OEMs
APAC, EU, LATAM, MEA, NA

Overview
Effective September 28, 2026, Johnson Controls® will discontinue the PENN® P66 and S66 series electronic controllers. You can replace
P66 series fan speed controllers with P266 series fan speed controllers. You can replace the PENN S66AA-1C electronic motor controller
with the P266ACA-100C controller.

Note: Although the P266 series are functional replacements for the P66 series, the P266 series has larger mounting dimensions. The
P266 series controller is 7 in. wide x 6 1/4 in. high. The P66 is 4 9/16 in. wide x 6 3/4 in. high.

Figure 1: P66 series dimensions, in. (mm) Figure 2: P266 series dimensions, in. (mm)

Last-time buy
Johnson Controls will fulfill last-time buy orders on a first-come, first-served basis, while inventory lasts. You can place last-time buy
orders for all currently active P66 and S66 series controller part numbers until September 28, 2026. Last-time buy orders must have a
requested ship date of December 4, 2026 or earlier. For a complete list of orderable part numbers, see Products available for last-time
buy. After September 28, 2026, Johnson Controls will no longer accept purchase orders for P66 series or S66 series controllers.

Support
Your Johnson Controls sales representative and internal support teams are available to answer your questions and to facilitate the
transition from P66 to P266 series fan speed controllers.

Products available for last-time buy
The following part numbers are available for last-time buy, including P20 accessories.

Product code Description

P66AAB-1C Single input sensor, 190 psig to 250 psig operating range, 10% start voltage, 60 in. capillary

P66AAB-2D Restricted to specific OEM customers

P66AAB-10C Single input sensor, 190 psig to 250 psig operating range, 16% start voltage, 120 in. capillary

P66AAB-34C Single input sensor, 320 psig to 410 psig operating range, 40% start voltage, 60 in. capillary

P66AAB-38C Single input sensor, 360 psig to 450 psig operating range, 40% start voltage, 60 in. capillary

P66ABB-24C NEMA 3R enclosure, 190 psig to 250 psig operating range, 16% start voltage, 60 in. capillary

P66BAB-1C Dual input sensor, 190 psig to 250 psig operating range, 10% start voltage, 60 in. capillary

P66BAB-2D Restricted to specific OEM customers

P66BAB-5C Dual input sensor, 190 psig to 250 psig operating range, 40% start voltage, 60 in. capillary

S66AA-1C Motor controller, 0 VDC to 10 VDC input, 50% start voltage

Replacement cross reference
For a replacement cross reference, refer to P66/S66 Series Controls to P266 Series Controls Replacement Guide Catalog Page.

Discontinuation schedule
■ Last orderable date: September 28, 2026
■ Last shipping date: December 4, 2026

Available documents on Knowledge Exchange - CLICK HERE

For further information, contact:

Keith Gifford
Senior Global Product Manager — PENN Products
keith.h.gifford@jci.com

All specifications and other information shown were current as of document revision and are subject to change without notice.
www.johnsoncontrols.com

Позиції каталогу з цим документом

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.