| Вид документа | Бюлетень виробу |
|---|---|
| Виробник | JCI |
| Код документа | d-3153-pneumatic-actuator-product-bulletin |
| Група обладнання | D-3153-6001 Pneumatic Actuator |
| Сторінок | 4 |
| Мова документа | англійська |
| Розмір файлу | 0.2 МБ |
Текст документа
D-3153 Pneumatic Actuator
Product Bulletin
Code No. LIT-2681054P
D-3153-xxxx Series Issued March 12, 2015
Refer to the QuickLIT website for the most up-to-date version of this document.
The D-3153 Pneumatic Actuator is a multipurpose
positioning device used primarily for operating
ventilating dampers in response to the output signals of
a pneumatic controller or electro-pneumatic
transducer.
The D-3153 Pneumatic Actuator is used with dampers
up to a maximum area of 16 ft2 (1.5 m2) for proportional
volume control, and 25 ft2 (2.3 m2) for 2-position
actuation (provided that the torque requirements are
compatible with the specific application).
Figure 1: D-3153 Pneumatic Actuator
Table 1: Features and Benefits
Features Benefits
All-Aluminum Housing Creates a lightweight, non-combustible actuator
Telescoping Linkage Provides fast, flexible installation
Long Life and Reliable Design Places over a million actuators now in service
2-way Swivel Head Ensures full power delivery
Application The control air pressure for normal HVAC operation is
0-20 psig (0-138 kPa). The minimum control pressure
When used with proportional control, the damper size
for safety damper functions is 20 psig (138 kPa) with
is limited to 16 ft2 (1.5 m2) maximum. As a 2-position the maximum pressure of 30 psig (207 kPa). When
control, damper size is limited to 25 ft2 (2.3 m2). used for both proportional and safety applications,
Three nominal spring ranges are available: provide a separate air signal to override normal HVAC
operation and cause safety damper functions.
• 3 to 7 psi (21 to 49 kPa), D-3153-7
The D-3153 Pneumatic Actuator incorporates several
• 5 to 10 psi (35 to 70 kPa), D-3153-3 and -6 internal and external features that add functional
• 8 to 13 psi (56 to 91 kPa), D-3153-1, -2, -4, -5, flexibility. A 2-way swivel connection on the actuator
and -18 cylinder head provides non-binding movement.
D-3153 Pneumatic Actuator Product Bulletin 1
All actuators have a telescoping piston rod for easy The auxiliary mounting bracket assembly facilitates
linkage of the damper for attachment points up to applying the D-3153 Pneumatic Actuator to allied
8-3/4 in. (222 mm) away from the face of the actuator. equipment manufacturer's products, and non
A swivel ball joint and slotted crank arm connector are Johnson Controls installations for actuator
furnished on all actuators for optional methods of conversions. These assemblies are furnished with a
linkage to the damper. crank arm linkage and pedestal style bracket. Two
positions are provided on the pivot post for attaching
The D-3153 Pneumatic Actuators, with universal and
the actuator to the mounting bracket so that force can
auxiliary mounting brackets, are specifically designed
be more directly applied to linkage points that are
for use with Johnson Controls® safety dampers up to
neither perpendicular nor parallel to the actuator
250°F (121°C).
mounting plane.
Operation A stop screw kit is available for special applications to
Air pressure from a pneumatic controller is applied to limit the power stroke of the actuator when required. A
the diaphragm of the actuator, which moves the piston 4 ft (122 cm) linkage rod is also available for special
against the forces of the internal spring and the load. applications to reach extended linkage when required.
The external load force shifts the operating range from
Where precision sequential operation is desired, or
the nominal spring range. The piston moves to a
additional positioning power is necessary, use a
position where the applied force and the spring, plus
D-9502 positioner. Up to four more D-3153 Pneumatic
external forces, are in equilibrium. However, with a pilot
Actuators may be subordinated from one pilot for
positioner added, the piston moves to a position
coupled dampers. A D-9502 kit is also available to
proportional to the control signal regardless of the load.
enable 2-stage actuator control for providing minimum
Installation outdoor air during occupation (refer to the D-9502
Two standard mounting packages are available with Pneumatic Damper Actuator Positioner Product
the D-3153 Pneumatic Actuator. The models with Bulletin [LIT-1628399P]).
universal mounting bracket assemblies provide all of Refer to the D-3153 with Universal Mounting Bracket
the parts and instructions required for applying the Installation Bulletin (Part No. 34-188-18) and the
actuator to Johnson Controls D-1300 damper D-3153 with Auxiliary Mounting Bracket Installation
applications: duct (wall) mounting or frame mounting, Bulletin (Part No. 34-154-19) for more details.
either normally open or normally closed.
Repair Information
Do not make field repairs. If the D-3153 Pneumatic
Actuator fails to operate within its specifications,
replace the unit. For a replacement actuator, contact
the nearest Johnson Controls representative.
Table 2: Force Values at 20 psig (140 kPa) Supply
Spring Range, psig (kPa) Stroke Force, lb (Newton) Torque Output for
90° Rotation
8 to 13 Power 105 (467) 158 in·lb (18 N·m)
(56 to 91) Return 120 (534) 180 in·lb (20 N·m)
5 to 10 Power 150 (667) 225 in·lb (25 N·m)
(35 to 70) Return 75 (334) 113 in·lb (13 N·m)
3 to 7 Power 195 (867) 293 in·lb (33 N·m)
(21 to 49) Return 45 (200) 68 in·lb (8 N·m)
2 D-3153 Pneumatic Actuator Product Bulletin
Dimensions
Crankarm
FIG: d3153_2
Figure 2: D-3153 Pneumatic Actuator Dimensions, in. (mm)
Figure 3: D-3153 Pneumatic Actuator with Universal Mounting Bracket Dimensions, in. (mm)
Figure 4: D-3153 Pneumatic Actuator with Auxiliary Mounting Bracket Dimensions, in. (mm)
Table 3: Ordering Information
Nominal Spring Range, psig With Universal With Auxiliary Body Only
(kPa) Mounting Bracket Mounting Bracket
8 to 13 (56 to 91) D-3153-2 D-3153-5 D-3153-6003
8 to 13 (56 to 91) with D-9502 D-3153-1 D-3153-4 –
0 to 3 (0 to 21) and 9 to 13 (63 to 91) – D-3153-18 –
with 2-stage Pilot
5 to 10 (35 to 70) D-3153-3 D-3153-6 D-3153-6002
3 to 7 (21 to 49) – D-3153-7 D-3153-6001
D-3153 Pneumatic Actuator Product Bulletin 3
Table 4: Accessories (Order Separately)
Description Shipping Weight, lb (kg) Code Number
Rubber Boot Kit 0.2 (0.09) D-3073-100
Ball Joint, weather resistant 0.3 (0.11) D-3073-604
Blade Arm Kit 1.0 (0.45) D-9999-100
Crank Arm, 1/2 in. adjustable to 2-3/4 in. radius 0.5 (0.23) D-3153-101
Crank Arm, 3/8 in. adjustable to 2-3/4 in. radius 0.5 (0.23) D-3153-108
Crank Arm, 7/16 in. adjustable to 2-3/4 in. radius 0.5 (0.23) D-3153-109
Linkage Rod, 4 ft (122 cm) 2.0 (0.91) D-3153-102
Linkage Rod, replacement 1.0 (0.45) D-3153-103
Stop Screw Kit, 1/4 – 24 x 3 in. 0.5 (0.23) D-3153-104
Proportional Pilot Positioner Kit 1 2.0 (0.91) D-9502-8
Ball Joint 0.5 (0.23) D-9999-104
Pivot Post, 5 per kit 0.5 (0.23) D-3153-110
E-rings for Pivot Post, 10 per kit 0.5 (0.23) D-3153-111
Mounting Nuts for Pivot Post, 10 per kit 0.5 (0.23) D-3153-112
Universal Mounting Bracket 3.5 (1.13) D-3153-105
Auxiliary Mounting Bracket 1.0 (0.45) D-3153-106
2-stage Positioner Kit 1 2.0 (0.91) D-9502-9
1. Positioner kit includes positioner, mounting plate, spring, and mounting hardware.
Technical Specifications
D-3153 Pneumatic Actuator
Product D-3153 Pneumatic Actuators
Stroke 3 in. (76 mm)
Control Air Pressure 0-20 psig (0-138 kPa) for HVAC
20 psig (138 kPa) minimum for safety damper functions
30 psig (207 kPa) maximum without pilot
Air Connections 1/8 in. NPT straight barbed fitting for 5/32 in. or 1/4 in. O.D. polytubing (furnished)
compression fitting for 1/4 in. O.D. copper tubing (optional)
Ambient Operating Conditions -20 to 150°F (-29 to 66°C)
Effective Diaphragm Area 15 in.2 (97 cm2)
Materials Body: Die-cast Aluminum; Diaphragm: Synthetic elastomer
Dimensions (H x W x D) See Figure 2, Figure 3, and Figure 4
Shipping Weight, lb (Kg) D-3153-1 11.5 (5.2) D-3153-3 10.0 (4.5) D-3153-5 8.5 (3.9) D-3153-7 8.5 (3.9)
D-3153-2 10.0 (4.5) D-3153-4 10.5 (4.8) D-3153-6 8.5 (3.9) D-3153-18 10.5 (4.8)
For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2015 Johnson Controls, Inc.
4 D-3153 Pneumatic Actuator Product Bulletin
Published in U.S.A. www.johnsoncontrols.comПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.