| Вид документа | Інструкція з монтажу |
|---|---|
| Виробник | JCI |
| Код документа | controller-configuration-tool-cct-installation-instructions |
| Група обладнання | Controller Configuration Tool |
| Сторінок | 13 |
| Мова документа | англійська |
| Розмір файлу | 0.6 МБ |
Текст документа
CCT Installation Instructions
Code No. LIT-12011529
Software Release 10.3
Issued August 2017
Summary of Changes................................................................................................................2
Document Introduction.............................................................................................................2
CCT Documentation..................................................................................................................2
Controller Tool Help............................................................................................................................2
Supported Operating Systems.................................................................................................2
Upgrading the CCT Software....................................................................................................4
Uninstalling CCT Release 10.2 or Earlier Software.........................................................................4
Uninstalling CCT Release 10.3 Software.................................................................................6
Installing the CCT Software .....................................................................................................8
CCT Software One-Click Installation.................................................................................................8
CCT Custom Installation..................................................................................................................10
Troubleshooting.......................................................................................................................13
CCT Installation Instructions 1
Summary of Changes
The following information is new or revised at this release:
• A streamlined one-click installer that provides a faster and more convenient method for tool installation. See the
CCT Software One-Click Installation section.
• You need to uninstall prior versions of CCT in order to use the Metasys Controller Configuration Tool to install
CCT 10.3. See the Uninstalling CCT Release 10.2 or Earlier Software section.
• Support for Standard and Express versions of Microsoft SQL Server® 2016 with SP1 and Windows Server®
2016. See the Supported Operating Systems section.
Document Introduction
Use this document to install or upgrade Controller Configuration Tool (CCT) software using the CCT product media.
You can order CCT media by using the new part number (MS-CCT-0) to update any of a site's computers.
Note: For users with CCT software at Release 10.2 or earlier, you must first uninstall the previous version and
install 10.3.
If you want to work with controller application files (CAFs) created with an earlier release of CCT, CCT Release 10.3
provides an option to switch release modes within the UI. You can work within and change modes of any Release
10.x version. Refer to the User Interface section within the Controller Tool Help (LIT-12011147) for procedures. For
releases prior to 10.0, see the procedures in Troubleshooting to perform a clean installation.
CCT Documentation
Table 1 lists documents related to CCT.
Table 1: CCT Documentation
For Information On See Document
Using the Metasys® System Site Management Metasys® SMP Help (LIT-1201793)
Portal
Using the CCT Software Controller Tool Help (LIT-12011147)
Features of CCT Controller Configuration Tool (CCT) Catalog Page
(LIT-1900386)
Strategies for Replacing Legacy N2 Controllers Modernization Guide for N2 Controllers - Metasys
(LIT-12012005)
Controller Tool Help
The Controller Tool Help (LIT-12011147) is the user’s guide to the CCT. Use the Tool to configure, simulate, and
commission a controller, such as a Field Equipment Controller (FEC), an Advanced Application Field Equipment
Controller (FAC), an NCE, an Input/Output Module (IOM), or a VAV Modular Assembly (VMA) 16 on a
Master-Slave/Token-Passing (MS/TP) bus.
For N2 compatible controllers, the Help provides guidance on communication switching, N2 point mapping, and N2
modules.
Supported Operating Systems
The following operating system and SQL Server configurations are supported for CCT.
CCT Installation Instructions 2
Table 2: Operating System and SQL Server Configuration
Operating System SQL Server Version
Windows® 10 Pro and Windows 10 Microsoft® SQL Server® 2016 Express with SP1 (64-bit)
Enterprise Editions with Anniversary
Microsoft SQL Server 2014 Express with SP2 (64-bit)
Update (version 1607) (64-bit)
Microsoft SQL Server 2012 Express with SP3 (64-bit)
Microsoft SQL Server 2016 Standard with SP1 (64-bit)
Microsoft SQL Server 2014 Standard with SP2 ( 64-bit)
Microsoft SQL Server 2012 Standard with SP3 (64-bit)
Windows 8.1 Pro or Windows 8.1 Microsoft SQL Server 2016 Express with SP1 (64-bit)
Enterprise (64-bit)
Microsoft SQL Server 2014 Express with SP2 (64-bit)
Microsoft SQL Server 2012 Express with SP3 (64-bit)
Microsoft SQL Server 2016 Standard with SP1 (64-bit)
Microsoft SQL Server 2014 Standard with SP2 (64-bit)
Microsoft SQL Server 2012 Standard with SP3 (64-bit)
Windows 8.1 Pro or Windows 8.1 Microsoft SQL Server 2016 Express with SP1 (32-bit)
Enterprise (32-bit)
Microsoft SQL Server 2014 Express with SP2 (32-bit)
Microsoft SQL Server 2012 Express with SP3 (32-bit)
Microsoft SQL Server 2016 Standard with SP1 (32-bit)
Microsoft SQL Server 2014 Standard with SP2 (32-bit)
Microsoft SQL Server 2012 Standard with SP3 (32-bit)
Windows 7 SP1 (64-bit) Microsoft SQL Server 2014 Express with SP2 (64-bit)
Microsoft SQL Server 2012 Express with SP3 ( 64-bit)
Microsoft SQL Server 2014 Standard with SP2 (64-bit)
Microsoft SQL Server 2012 Standard with SP3 (64-bit)
Windows 7 SP1 (32-bit) Microsoft SQL Server 2014 Express with SP2 (32-bit)
Microsoft SQL Server 2012 Express with SP3 (32-bit)
Microsoft SQL Server 2014 Standard with SP2 (32-bit)
Microsoft SQL Server 2012 Standard with SP3 (32-bit)
1 Microsoft SQL Server 2008 Express R2 is not supported, but the software is still compatible with Release 10.3 CCT.
Windows 10 Pro and Windows 10 Enterprise (64-bit)
• .NET Framework Version 4.6.1
• Windows Internet Explorer® 11 or Microsoft Edge® (required for Controller Tool Help)
• Adobe® Reader® (required for printing in CCT)
Windows 8.1 Pro and Windows 8.1 Enterprise (32- or 64-bit)
• .NET Framework Version 4.6.1
• Windows Internet Explorer 11 (required for Controller Tool Help)
• Adobe Reader (required for printing in CCT)
Windows 7 Professional, Enterprise, and Ultimate Editions (32- or 64-bit)
• Service Pack 1 (SP1)
• .NET Framework Version 4.6.1
• Windows Internet Explorer 11 (required for Controller Tool Help)
• Adobe Reader (required for printing in CCT)
CCT Installation Instructions 3
Upgrading the CCT Software
Notes:
• If you have a version of CCT prior to 10.3 installed on your computer, you must uninstall the software before you
install 10.3 and upgrade.
• If you want to work with controller application files (CAFs) created with an earlier release of CCT, CCT Release
10.3 provides an option to switch release modes within the UI. You can work within and change modes of any
Release 10.x version. Refer to the User Interface section within the Controller Tool Help (LIT-12011147) for
procedures. For releases prior to 10.0, see the procedures in Troubleshooting to perform a clean installation.
Uninstalling CCT Release 10.2 or Earlier Software
Perform these steps before installing/upgrading your software to Release 10.3.
1. On the Start menu, click Control Panel. The Control Panel appears.
2. Click Programs and Features. The Programs and Features window appears.
3. In the list of programs, right-click Metasys CCT 10.2 and click Uninstall. The Welcome window appears.
Figure 1: Metasys CCT InstallShield Wizard Welcome Window
4. Click Next. The Uninstall CCT Databases window appears.
CCT Installation Instructions 4
Figure 2: Uninstall CCT Databases
5. Click Next. The Remove the Program window appears.
Figure 3: Remove the Program Window
6. Click Remove. The Setup Wizard uninstalls the program. When finished, the Setup Wizard Completed window
appears.
CCT Installation Instructions 5
Figure 4: Uninstallation Completed
7. Click Finish. At the prompt to restart your computer, choose to restart now or later.
8. Go to CCT Custom Installation.
Uninstalling CCT Release 10.3 Software
1. On the Start menu, click Control Panel. The Control Panel appears.
2. Click Programs and Features. The Programs and Features window appears.
3. In the list of programs, right-click Metasys Controller Configuration Tool 10.3 and click Uninstall. The Metasys
Controller Configuration Tool 10.3 Setup window appears.
CCT Installation Instructions 6
Figure 5: Metasys Controller Configuration Tool 10.3 Setup Window
4. Click Uninstall. The Uninstall CCT Databases window appears.
Figure 6: Uninstall CCT Databases Window
Note: The Remove databases checkbox is selected by default. If SQL Server is already uninstalled or the user
account information is unknown, remove the selection of the Remove databases checkbox.
CCT Installation Instructions 7
5. Login in to your SQL Server. To log in to your SQL Server with Windows Credentials keep the Use Windows
Credentials checkbox selected. To log in to your SQL Server using SQL Server authentication, remove selection
of the Use Windows Credentials check box and enter the username and password.
6. Click Uninstall. The Uninstall Program Progress window appears.
7. Click Finish when the Uninstallation Complete window appears.
Figure 7: Uninstall Complete Window
Installing the CCT Software
CCT Software One-Click Installation
Note: The one-click installation is available on computers with Windows 7, Windows 8.1, or Windows 10 and when
SQL Server is not already installed. If you already have SQL Server installed or want to follow the Custom
installation option, see the CCT Custom Installation section.
1. Insert the CCT product disc.
2. In Windows® File Explorer, browse to the CCT folder.
3. Double-click the MetasysControllerConfigurationTool_10.3.exe file. The Metasys Controller Configuration
Tool 10.3 Setup window appears.
CCT Installation Instructions 8
Figure 8: Metasys Controller Configuration Tool 10.3 Setup Window
4. Click Install. All prerequisite software for CCT is installed first, then the CCT software is installed. The Install
Program Progress window appears.
5. Click Restart Now when the Complete! status appears.
Figure 9: Installation Complete Window
CCT Installation Instructions 9
6. When you run CCT for the first time, you are prompted to choose a Release Mode. For information on choosing
a Release Mode, refer to the Release Modes section of the Controller Tool Help (LIT-12011147).
CCT Custom Installation
1. Insert the CCT product disc.
2. In Windows File Explorer, browse to the CCT folder.
3. Double-click the MetasysControllerConfigurationTool_10.3.exe file. The Metasys Controller Configuration
Tool 10.3 Setup window appears.
Figure 10: Metasys Controller Configuration Tool 10.3 Setup Window
4. Click Custom. The SQL Server Selection window appears from the Database tab.
Note: Users with SQL Server installed prior to this installation are also able to access the SQL Server Selection
window by clicking Install.
CCT Installation Instructions 10
Figure 11: SQL Server Selection Window
5. Select the Install SQL Server Express Locally or Use Existing Database Server options to set up your SQL
server preferences, then select one of the following SQL login authentication options:
• Windows authentication credentials of current user
Select this option to log in to the SQL Server software by using the Windows operating system credentials
of the current Windows user.
To use this option, the current Windows user must have SQL Server Administrator rights on the SQL Server.
If the user does not have these rights, do not select this option.
• SQL Server Login and Password
Select this option and fill in the SQL Username and Password fields to use SQL Server authentication to
access SQL Server software during the installation. In the SQL Username field, enter a valid server
administrator (SA) user name for the SQL Server software on the computer. In the Password field, enter the
matching password.
Note: When you install CCT on a computer running SQL Server, the startup type of the SQL Server Browser
service must be set to Automatic. The SQL Server Browser service must be running when you start CCT.
6. Click the General tab. The Destination Folder window appears.
CCT Installation Instructions 11
Figure 12: Destination Folder Window
7. To install CCT in the specified destination folder, click Install. If you want to install CCT in a different location,
click Browse, select the location, and then click Install. The Install Program Progress window appears.
8. Click Finish when the Installation Complete window appears.
Figure 13: Installation Complete Window
When you run CCT for the first time, you are prompted to choose a Release Mode. For information on choosing
a Release Mode, refer to the Release Modes section of the Controller Tool Help (LIT-12011147).
CCT Installation Instructions 12
Troubleshooting
Problem Solution
CCT does not function properly when you downgrade to Controller Tool Release 10.2 and later provide an option to
an earlier version (for example, you uninstall Release 10.1 switch release modes within the UI. You can work within and
and install Release 10.0). change modes of any Release 10.x version. For earlier releases,
follow these procedures to complete a clean installation:
1. Uninstall the current version of CCT.
2. Back up the data found in the CCT folder:
• C:\ProgramData\Johnson Controls\MetasysIII\
3. Delete the CCT folder from the following locations:
• C:\Program Files (x86)\Johnson Controls\
• C:\ProgramData\Johnson Controls\MetasysIII\
4. Back up the data found in the DataAccess folder:
• C:\ProgramData\Johnson Controls\MetasysIII\
5. Delete the DataAccess folder from the following location:
• C:\ProgramData\Johnson Controls\MetasysIII\
6. Install the earlier version of CCT.
7. Restart your computer.
The following error message appears: Use a Windows user account with Administrator privileges to
install the software.
Setup could not find the WMI service called
'winmgmt' on this PC. Setup will not continue.
Building Technologies & Solutions
507 E. Michigan Street, Milwaukee, WI 53202
Johnson Controls® is a registered trademark of Johnson Controls.
All other marks herein are the marks of their respective owners.© 2017 Johnson Controls
Published in U.S.A. www.johnsoncontrols.com
CCT Installation Instructions 13Позиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.