| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Моделі | LN-PRG203-12, LN-PRG300-12, LN-PRG4x0-12, LN-PRG6x0-12, LN-VAVCF-12, LN-SVSEN-0, LN-SVSENH-0 |
| Група обладнання | automation |
| Мова документа | англійська |
| Розмір файлу | 0.4 МБ |
Про документ
The Johnson Controls LN Series is a family of LONWORKS® based building automation devices comprising programmable controllers, application-specific controllers, displays, schedulers, and programmable thermostats. The line integrates into the Metasys® system via a LONWORKS-enabled Network Automation Engine (NAE) and is designed for use with any open, interoperable LONWORKS network.
Ключові дані
| Network technology | LONWORKS (peer-to-peer), LONMARK certified |
|---|---|
| LONMARK Interoperability Guidelines | Version 3.3 for application-specific controllers; Version 3.4 for programmable units |
| Scheduler capacity | up to 16 schedules |
| Wireless protocol | EnOcean®, 868 MHz or 315 MHz |
| Wireless receiver mounting | 1/2 NPT hub (metal enclosure) or double-sided tape |
| Communicating sensor compatibility | LN-PRGxxx-12 models only |
Застосування
- Programmable controllers for rooftop units, fan coils, heat pumps, ventilator units, and terminal units
- Application Free VAV and VVT programmable controllers for applications demanding more than an application-specific controller
- Fan Coil Unit (FCU) Controller: two-pipe shared cooling/heating and four-pipe cooling/heating; cooling only, heating only, or cooling and heating; up to three stages of cooling or heating; digital, floating, or modulating valves
- Rooftop Unit (RTU) Controller: mechanical stages, modulating valves, floating outputs; up to four stages of cooling or heating; humidity control device management
- Heat Pump Unit (HPU) Controller: dual mode heat pumps, modulating valves, water-to-refrigerant heat pumps; up to four stages of cooling or heating; defrost cycle; dehumidification cycle
- Network Configurable Thermostat with LCD: single and multistage control of heating/cooling equipment such as rooftop and heat pumps
- Scheduler and Display: facility event management and local user interface to the Metasys system
- Analog wall sensors for fan coil, heat pump, roof top, and other terminal units; precise indoor local temperature sensing with local setpoint adjustment
- Communicating sensors (LN-PRGxxx-12 models only): temperature sensing, status information, occupancy overrides; humidity monitoring on LN-SVSENH-0
- Wireless retrofit solution using wireless sensors and switches, minimizing impact on building structure
Особливості
- LONWORKS network compliant and certified per LONMARK Interoperability Guidelines Version 3.3 (application-specific) / 3.4 (programmable)
- Peer-to-peer communication between controllers via LONWORKS technology
- Programming/configuring via LNS® Plug-in from a common tool environment (LN-Free Programming Plug-in, LN Graphical Programming Interface (GPI) Plug-in with LN-Builder software)
- Metasys system integration via LONWORKS integration to an NAE
- Wireless Receiver Module uses EnOcean® protocol on 868 MHz or 315 MHz frequency
- Wireless receiver mounting options: double-sided tape for surface mounting near controller; 1/2 NPT hub for metal enclosure exteriors
- Direct connection of Wireless Receiver Module to wireless-option controllers enables easy input count expansion and field upgrades
- Display node combines scheduling capabilities with integral display and buttons for local user interface
Технічні дані
| Parameter | Value |
|---|---|
| Network technology | LONWORKS®, peer-to-peer communication |
| LONMARK certification | Version 3.3 (application-specific controllers); Version 3.4 (programmable units) |
| Engineering tools | LNS® Plug-in, LN-Builder software, LN Graphical Programming Interface (GPI) Plug-in |
| Metasys integration | Via LONWORKS-enabled Network Automation Engine (NAE) |
| Scheduler schedule storage | Up to 16 schedules |
| Wireless protocol | EnOcean® |
| Wireless frequencies | 868 MHz or 315 MHz |
| Wireless receiver mounting | Double-sided tape; 1/2 NPT hub (metal enclosures) |
| Communicating sensor models | LN-SVSEN-0 (temperature); LN-SVSENH-0 (temperature + humidity) |
| Communicating sensor compatibility | LN Free Programmable Controllers, LN-PRGxxx-12 models only |
Варіанти замовлення
Programmable controllers listed in related documentation:
- LN-PRG203-12 Controller (LIT-12011776)
- LN-PRG300-12 Controller (LIT-12011777)
- LN-PRG4x0-12 Controller (LIT-12011778)
- LN-PRG6x0-12 Controllers and I/O Extension Modules (LIT-12011800)
- LN-VAVCF-12 VAV Controller (LIT-1201807)
- Application Specific Controllers (LIT-1201915)
- Powered Fan Coil Unit (PFCU) Controller (LIT-12011315)
- LN-VSTAT and LN-PSTAT Sensors (LIT-12011300)
Допуски та стандарти
- LONMARK® Interoperability Guidelines, Version 3.3 (application-specific controllers) and Version 3.4 (programmable units)
Текст документа
LN Series Controllers Overview
Product Bulletin
Code No. LIT-1201979
Software Release 6.0
Issued January 30, 2013
Supersedes October 4, 2010
The complete line of LN Series, LONWORKS® based
devices includes programmable controllers,
application-specific controllers, displays, schedulers,
and programmable thermostats. This product line is
easily integrated into the Metasys® system when
coupled with a LONWORKS enabled Network
Automation Engine (NAE).
The complete family of LN Series controllers is
designed for use with any LONWORKS network open
and interoperable system.
Figure 1: LN Series Controllers
Table 1: Features and Benefits
Features Benefits
LONWORKS Network Compliant and Certified Complies with LONMARK® Interoperability Guidelines, Version 3.3 for
application-specific controllers; Version 3.4 for programmable units. The
controllers are based on the LONWORKS technology for peer-to-peer
communication between controllers.
Programmable via LNS® Plug-in Allows all controllers, whether configurable or programmable, to be
engineered from a common tool environment.
Integration to the Metasys System Allows all components of the LN Series line to be used with the Metasys
system via a LONWORKS integration to an NAE.
LN Series Controllers Overview Product Bulletin 1
Programmable Controllers Application Specific Controllers
The LN Series Free Programmable Controllers are These controllers are designed for the more common
designed to be applied in a variety of building HVAC applications found on equipment such as fan
applications (Figure 2). You can control equipment, coils, rooftop equipment, heat pumps, and unit
such as roof top units, fan coils, heat pumps, ventilator ventilators. The controllers can be configured through
units, and terminal units. The LN Series Free any LNS compliant software with an easy-to-use
Programmable Controller line can be programmed plug-in. The plug-in is designed to simplify complex
using the LN-Free Programming Plug-in or the LN programming and sequencing methods by prompting
Graphical Programming Interface (GPI) Plug-in with the user for the necessary configuration data.
LN-Builder software.
Figure 4: Rooftop Application Specific
Figure 2: LN Series Free Programmable Controller
Controllers
Fan Coil Unit (FCU) Controller
Application Free VAV and VVT Programmable The Fan Coil Unit controller supports a wide range of
Controllers sensors and actuators and is used in the following
applications:
The Application Free Variable Air Volume (VAV) and
Variable Volume Temperature (VVT) programmable • two-pipe coil shared cooling and heating and
controllers provide programming flexibility when the four-pipe coil cooling and heating
application demands more than an application-specific
• fan-coil applications including cooling only, heating
controller (Figure 3).
only, and cooling and heating
• up to three stages of cooling or heating
• digital, floating, or modulating valves application
Rooftop Unit (RTU) Controller
The Rooftop Unit controller supports a wide range of
sensors and actuators and is used in the following
applications:
• most rooftop applications including mechanical
stages, modulating valves, and floating outputs
• up to four stages of cooling or heating
• management for humidity control devices
Figure 3: LN Series VAV Controller
2 LN Series Controllers Overview Product Bulletin
Heat Pump Unit (HPU) Controller Network Configurable Thermostat with
The Heat Pump Unit controller supports a wide range Liquid Crystal Display (LCD)
of sensors and actuators and is used in the following The LN Series thermostat family is specifically
applications: designed for single and multistage control of heating/
• requirements met for most heat pump unit cooling equipment such as rooftop and heat pumps
applications including dual mode heat pumps, (Figure 6). The LCD allows occupants in the space to
modulating valves, and water to refrigerant heat see their space conditions, and to adjust it as required.
pumps The complete family of LN Series controllers is
designed for use with any LONWORKS network open
• up to four stages of cooling or heating and interoperable system.
• defrost cycle for system maintenance
• dehumidification cycle
Scheduler and Display
The LN Series of programmable and application
specific controllers are complimented by the Display
and Scheduler that help manage facility events and
provide a straightforward user interface where
authorized building occupants can interact with building
systems.
The LN Series Scheduler is a LONWORKS based node
capable of storing and managing up to 16 schedules.
The Scheduler is initially configured through an LNS
plug-in to any LNS Network Management software,
including LN Builder (Figure 5). Figure 6: Metasys System LN Series
Network Configurable Thermostat
LN Series Sensors
The LN Series analog wall sensor family is specifically
designed to interface with fan coil, heat pump, roof top,
and other terminal units, building automation controls
(Figure 7). The units provide precise indoor local
temperature sensing. Local setpoint adjustment with
various scales is available as well.
Figure 5: LN Series Scheduler
The LN Series Display is an extension of the
Scheduler. The Display node provides the scheduling
capabilities of the Scheduler, and also incorporates an
integral display and buttons to serve as a local user
interface to your Metasys system. The Display is
capable of displaying and providing the ability to
manipulate many variables associated with the
operation of your facility.
Figure 7: LN Series Sensor
LN Series Controllers Overview Product Bulletin 3
LN Series Communicating Sensors You can install the Wireless Receiver Module in
Designed to interface with LN Free Programmable multiple ways: double-sided tape allows you to mount
Controllers (LN-PRGxxx-12 models only), the LN the controller on any type of surface while maintaining
Series Communicating Sensor line consists of two close proximity to the controller. If the controller is in an
models (LN-SVSEN-0 and LN-SVSENH-0). Each metal enclosure, you can mount the Wireless Receiver
provides precision local temperature sensing, system on the enclosure’s exterior using a 1/2 NPT hub.
status information, and a variety of control In building retrofits, the Wireless Receiver Module
functions.You can view the temperature, adjust the allows you to use wireless sensors and switches. This
setpoint, and apply occupancy overrides. In addition, solution minimizes the impact on building structure and
with the LN-SVSENH-0 model, you can monitor preserves architecture and materials. When you use
humidity level (Figure 8). the LN Series Wireless Receiver Module, you can
You can also use the LN Series Communicating avoid wiring complexities and correct any initial design
Sensors to configure applications in LN-VAVCF-12 errors. Because the Wireless Receiver Module can
controllers. connect directly to wireless-option controllers, you can
easily expand input counts, enabling you to implement
field upgrades with ease.
Figure 8: LN Series Communicating Sensor
Wireless Option LN Series Controllers and
Wireless Receivers
The LN Series Wireless Receiver Module enables
LN Series controllers to receive input signals from Figure 9: LN Series Wireless Receiver
wireless sensors and switches. The LN Series Wireless
Receiver Module uses the EnOcean® protocol for
communication on either an 868 MHz or 315 MHz
frequency.
LN Series Controllers Overview Product Bulletin 4
Related Documentation • LN Series Display Product Bulletin (LIT-12011806)
Refer to the following product bulletins for information • LN Series Remote Input/Output (I/O) Modules
on LONMARK objects and network variables, and Product Bulletin (LIT-12011316)
technical specifications.
• LN Series Variable Air Volume (VAV) and Variable
• LN Series Free Programmable LN-PRG203-12 Air Volume and Temperature (VVT) Controllers
Controller Product Bulletin (LIT-12011776) Product Bulletin (LIT-12011298)
• LN Series Free Programmable LN-PRG300-12 • LN Series Application Specific Controllers Product
Controller Product Bulletin (LIT-12011777) Bulletin (LIT-1201915)
• LN Series Free Programmable LN-PRG4x0-12 • LN Series Powered Fan Coil Unit (PFCU)
Controller Product Bulletin (LIT-12011778) Controller Product Bulletin (LIT-12011315)
• LN Series Free Programmable LN-PRG6x0-12 • LN Series LN-VSTAT and LN-PSTAT Sensors
Controllers and LN Series Input/Output (I/O) Product Bulletin (LIT-12011300)
Extension Modules Product Bulletin
• LN Series Communicating Sensors Product
(LIT-12011800)
Bulletin (LIT-12011779)
• LN Series Variable Air Volume (VAV)
• LN Series Sensors Product Bulletin (LIT-1201874)
LN-VAVCF-12 Controller Product Bulletin
(LIT-1201807) • LN Series Wireless Solution Guide Technical
Bulletin (LIT-12011628)
• LN Series Scheduler Product Bulletin
(LIT-12011805)
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners. © 2013 Johnson Controls, Inc.
LN Series Controllers Overview Product Bulletin 5
Published in U.S.A. www.johnsoncontrols.com
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.
