Декларація відповідності ETI — NV/NH low voltage NH knife blade fuses (1659_declaration)

Ключові дані

Текст документа

EU - Declaration of conformity

Manufacturer:                        ETI Elektroelement d.o.o.
Address:                             Obrezija 5, 1411 Izlake, SLOVENIA
Products:                            NV (NH) gG Low-voltage Fuse Links
                                     (with standard type of indicator, with SI type of indicator,
                                     with striker-pin type of indicator, non-insulated gripping-lugs)
                                     Size NH 4, 630A, 710A, 800A, 900A, 1.000A, 1.250A / 500V a.c.,
                                                        standard type of indicator

                                     Size NH 4a, 630A, 710A, 800A, 900A, 1.000A, 1.250A, 1.500A, 1.600A
                                                 / 500V a.c., standard and SI type of indicator
                                     Size NH 4a, 500A, 630A, 800A, 1.000A, 1.250A / 690V a.c.,
                                                        Striker-pin type of indicator

This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object(s) of the declaration described above is (are) in conformity with the relevant Union harmonisation
legislations:
2014/35/EU
Directive of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the
laws of Member States relating to the making available on the market of electrical equipment designed for
use within certain voltage limits; Official Journal of the EU L96, 29/03/2014, p. 357-374 (from 20.04.2016).
2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (recast).
2015/863/EU
Directive of the European Parliament and of the Council of 31 March 2015 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment, amending Annex II of Directive EU 2011/65/EU -
RoHS3, (from 22.07.2019)
Our products are constructed and manufactured based on our Quality Management System (according to
DIN EN ISO 9001) in correspondence to the following standards:
Harmonized European
standards:                                        DIN EN 60269-1:2015-05
IEC standards:                                    IEC 60269-1 Ed.4.2:2014-06, IEC 60269-2 Ed.5.1:2016-08
National standards:                               VDE 0636-1:2015-05, DIN VDE 0636-2:2023-07, VDE 0636-2:2014-09,

Type test reports:                                AIT Vienna Test Report SGP-22239/NH4a/250A-1.250A/500V/gG
                                                  ETI d.o.o. and Jean Mueller internal test reports from independent testing
                                                  stations

Marking with CE:                                  On the product / On the packaging
Affixing of the CE-marking:                       2001
Place and date:                                   Izlake, 21.11.2023
Manufacturer representative
signature and stamp:                              Viktor Martinčič, univ.dipl.ing.

D:\Mape\CE_ECD_angleške nemške in razne ostale izjave\D_Splošne EU_RoHS izjave NOVE 2019_2020_2021_2022_2023\VARO EU_ETI_V4\NV_NH gG_New\EU_RoHS_NH4 and NH4a gG_V4.doc

Позиції каталогу з цим документом

• 004116101 — Ножевые предохранители NV 4 gG 630A / 500V
• 004116102 — Ножевые предохранители NV 4 gG 710A / 500V
• 004116103 — Ножевые предохранители NV 4 gG 800A / 500V
• 004116104 — Ножевые предохранители NV 4 gG 1000A / 500V
• 004116105 — Ножевые предохранители NV 4 gG 900A / 500V
• 004116106 — Ножевые предохранители NV 4 gG 1250A / 500V

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.